Abstract
The gate-driven effect and substrate-triggered effect on electrostatic discharge (ESD) robustness of CMOS devices are measured and compared in this paper. The operation principles of gate-grounded design, gate-driven design, and substrate-triggered design on CMOS devices for ESD protection are explained clearly by energy-band diagrams. The relations between ESD robustness and the devices with different triggered methods are also explained by transmission line pulsing (TLP) measured results and energy-band diagrams. The turn-on mechanisms of nMOS devices with triggered methods are further verified using the emission microscope (EMMI) photographs of the nMOS devices under current stress. The experimental results confirm that the substrate-triggered design can effectively and continually improve ESD robustness of CMOS devices better than the gate-driven design. The human body model (HBM) ESD level of nMOS with a W/L of 400 /spl mu/m/0.8 /spl mu/m in a silicided CMOS process can be improved from the original 3.5 kV to over 8 kV by using the substrate-triggered design. The gate-driven design cannot continually improve the ESD level of the device in the same deep-submicron CMOS process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Device and Materials Reliability
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.