Abstract
The technology of insulation of enclosing constructions of buildings and constructions is characterized. The method of technological design on the basis of integrated production of technological processes, estimation and influence of organizational and technological reliability of building production depending on methods, technologies and constructive decisions is given.The data collection for the energy certificate of the building is shown. Energy certificate of the building is a document containing the geometrical, energy and heat engineering characteristics of the building being designed or operated, as well as the characteristics of the heat insulation. This document also establishes the compliance of the building with the requirements of regulatory documents. The energy passport of the building is not intended to be used to make payments for utility or other services provided to homeowners, tenants and apartment owners.Energy assessment of the building - energy efficiency of buildings should be determined on the basis of estimated or actual annual energy consumption necessary to meet various needs associated with its typical use in the building. These needs should include the energy consumption for heating and cooling to maintain the desired temperature, as well as hot water supply.
Highlights
In present-day conditions of socio-economic development of Ukraine, the cost and amount of energy directed to heating of buildings, is very important
The analysis of the obtained correlation shows that the method of glue solution application, that is, the technological methods of thermal insulation, allows to optimize the structural design of the thermal insulation system and increase the efficiency of the thermal insulation by 4.2%
We should mention the importance of thermal protection under the conditions of environmental protection
Summary
In present-day conditions of socio-economic development of Ukraine, the cost and amount of energy directed to heating of buildings, is very important. The rational increase of the heat-protective properties of the external enclosing structures of buildings cannot be achieved by increasing their thickness This issue requires other approaches like using of modern technologies and effective insulation materials. The analysis of the obtained correlation shows that the method of glue solution application, that is, the technological methods of thermal insulation, allows to optimize the structural design of the thermal insulation system and increase the efficiency of the thermal insulation by 4.2%. This requires the development of a suitable methodology. With this method of insulation, the base will be slightly lower in relation to the wall, which will protect it from atmospheric precipitation
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have