Abstract

As our world demands more and more energy and fossil fuel resources are running out, searches on finding alternative fuels in internal combustion engines are increasing. Alcohols and biofuels obtained from oils can be used as alternative diesel fuels. The present work investigated the effects of n-butanol addition to safflower biodiesel usage in a diesel engine used for driving an electrical power generator. Safflower biodiesel was obtained by using transesterification method. Binary blends of butanol-biodiesel and ternary blends of ultra-low sulfur diesel-biodiesel–butanol were contained 5%, 10%, and 20% butanol in volume basis. The tests were carried out on a four-cylinder, four-strokes, and direct-injection diesel engine at half load operation with stable engine speed of 1500 rpm. Experimental test results on combustion characteristics, emission and performance of the fuels were investigated. According to test results, formation of heat release rates and in-cylinder pressure curves were considerably similar and total heat transfer, average gas temperature and mass fraction burned were slightly changed. The ternary blends showed lower emission and increased brake thermal efficiency up to 1.5%. Besides, average mass fuel consumption was increased up to 5% and brake specific fuel consumption up to 6%. For the other fuels, emission and brake thermal efficiency were deteriorated.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.