Investigation of the direct-flow jets vortex motion in the M-shaped boiler invert furnace

Abstract

For advanced ultra-supercritical parameters (A-USC) of steam, the design of an M-shaped boiler is proposed, designed to operate in a 500 MW unit on a lean coal (grade TR). The boiler profile is selected from the condition of minimizing the length of the main steamlines made of expensive nickel-alloy steel. With regard to this boiler, a scheme has been developed for pulverized coal combustion in an invert furnace using direct-flow burners and nozzles. Research has been carried out on the physical model of the furnace in the implementation of this combustion scheme: a qualitative study of the trajectories of the burner jets, jets of secondary and tertiary air obtained by their hot spark visualization; quantitative determination of the main characteristics of burner jets and their weight gain. The studies have shown the high efficiency of the recommended scheme of the furnace-burner device: a staged supply of the oxidizer along the flame length and along the furnace height is organized; the dynamic pressure of jets on the furnace wall tubes is excluded; vortex furnace aerodynamics should provide a high degree of burnout of coal dust particles; air jets evenly fill the horizontal section of the furnace; the ejection capacity of turbulent jets is much higher than for a flat submerged jet.