Abstract
In this paper, the effect of adding graphene oxide nano-platelets (GONPs) into the adhesive layer was investigated on the creep behavior of adhesively bonded joints. The neat and GONP-reinforced adhesive joints were manufactured and tested under creep loading with different stress and temperature levels. 0.1 wt% GONPs revealed the highest improvement on the adhesive joint creep behavior amongst the studied weight percentages. Furthermore, the effect of GONPs on the creep behavior of adhesive joints was more significant at higher temperatures. It was found that adding 0.1 wt% of GONPs into the adhesive layer imposed reductions of 21%, 31% and 34% in the elastic shear strains and reductions of 24%, 31% and 37% in the creep shear strains of SLJs under testing temperatures of 30, 40 and 50 °C, respectively. The Burgers rheological model was employed for simulating the creep behavior of the neat and GONP-reinforced adhesive joints. The Burgers model parameters were obtained as functions of testing temperature, creep shear stress and GONP weight percentage using a response surface methodology. Reasonable agreement was obtained between the modeled and experimental creep behaviors of the adhesive joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
