Abstract
Four experimental fuel assemblies (EFAs) containing 9Cr-ODS steel cladding fuel pins were previously irradiated in the BOR-60 to demonstrate the in-reactor performance of 9Cr-ODS steel for use as fuel cladding tubes. One of the EFAs achieved the best data, a peak burn-up of 11.9at% and a neutron dose of 51 dpa, without any microstructure instability or any fuel pin rupture. On the other hand, in another EFA (peak burn-up, 10.5at%; peak neutron dose, 44 dpa), peculiar irradiation behaviors, such as microstructure instability and fuel pin rupture, occurred. Investigations of the cause of these peculiar irradiation behaviors were carried out. The detection sensitivity in an ultrasonic inspection test was shown to be low for the metallic Cr and metallic Fe inclusions. The peculiar microstructure change reappeared with high-temperature thermal-aging of the 9Cr-ODS steel containing metallic Cr inclusions. The strength and ductility of the defective part containing metallic Cr inclusions were appreciably lower than those of a standard part without the inclusions. The combined effects of matrix Cr heterogeneity (presence of metallic Cr inclusions) and high-temperature irradiation were concluded to be the main cause of the peculiar microstructure change in 9Cr-ODS steel cladding tubes in the BOR-60 irradiation tests. They contributed to the fuel pin rupture.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
