Investigation of the Activity and Stability of Manganese-Based Electrocatalysts for the Electrochemical Oxidation of Water and Small Organic Molecules in Acidic Electrolyte

Abstract

Water electrolysis is a crucial process for hydrogen production, providing a clean and sustainable method for H2 production. Iridium-based catalysts are particularly effective in promoting the oxygen evolution reaction (OER) that takes place at the anode of electrolyzers. The unique properties of iridium make it well-suited for this purpose, but its high cost becomes a bottleneck in making water electrolysis economically viable on a large scale. Manganese-based electrocatalysts have emerged as promising candidates for the OER, mainly due to their earth abundance, low toxicity, and activity. It has been shown that manganese oxide can operate stably in acid, in a restricted potential window, where the formation of permanganate ions is avoided. Thus, for practical application, the stability must be improved, so a larger potential window can be employed. To address this challenge, some approaches have emerged from combining a catalytically active, but instable oxide, with the one that is stable, but inactive for the OER. In the presentation, we will show the results of activity, stability, and faradaic efficiency (FE) for O2 formation for water electro-oxidation on manganese oxide, and on manganese oxide combined with antimony, tin, titanium, niobium, and silicon oxide. The faradaic efficiencies, determined via EC-MS (Electrochemistry coupled to mass spectrometry) measurements revealed that manganese antimonate and pure manganese oxide have the highest values for O2 formation, with the former presenting higher stability at high overpotentials. We will discuss the obtained trends in stability and FEs for the other synthesized oxides. Additionally, for these two most efficient electrocatalysts, EC-MS measurements were conducted for the electrochemical oxidation of some small organic molecules, such as formic acid, methanol, ethanol, and ethylene glycol (electrochemical reforming for H2 production). The results showed that the selectivity for the electro-oxidation of water and/or of the organic molecule (monitoring the formation of CO2) strongly depends on the catalyst composition and on the number of carbon atoms of the molecule. We will further discuss, in the presentation, the factors that govern the selectivity and stability for each case. The obtained results of this study may be helpful for developing more efficient, selective and, mainly, more stable earth-abundant electrocatalysts for electrolyzers.