Abstract

This paper proposes a study of an energy harvesting system for powering wireless sensor network (WSN) devices. The thermal energy harvesting system used is based on the thermal energy source between ambient air at the soil surface with five depth levels. Measurement was taken for 46 days in a garden area located in Melaka, Malaysia. A feasibility study of soil temperature measurement to obtain a temperature gradient can be used for harvesting by using thermoelectric generators (TEG) modules. Then, the efficiency of TEG with several different configurations based on temperature gradient data has been tested in the laboratory. The results revealed that the depth of soil 6 cm between sensors 1 and 3 will gave the best representation of level average temperature different around 1 ℃. Based on the temperature gradient data, the combination of three TEG SP1848 in a series connection with DC-DC step-up circuit DC1664 will produce an optimum voltage output of about 3 V. This output voltage is enough to operate low power IoT device derived from thermal energy.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call