Abstract
Films containing layers of dispersion-hardening alloys (LDHA) based on the Fe-Cr-Co system were obtained by magnetron sputtering. LDHA acquire the properties of film permanent magnets after a single-stage «fast» high-vacuum annealing. Bulk materials acquire such properties only after many hours of multi-stage heat treatment. The film samples acquire these properties in tens of seconds. The morphology of their surface was studied to determine the origin of the coercive force of film samples. The surface morphology was studied using high resolution scanning electron microscopy and atomic force microscopy. We studied two compositions that, in bulk, have a different tendency to form many phases during crystallization. In magnetron sputtering, the alloy in which a multiphase state is easily formed is polycrystalline. The antipode alloy in magnetron sputtering is realized in an amorphous state. After annealing, both alloys are in a polycrystalline state. Electron microscopic examination showed that as a result of annealing, crystallites are formed with a large projection onto the substrate plane, which grow due to the nearest neighbors. Moreover, these crystallites have not only a large area, but also a height. After annealing, both alloys are in a polycrystalline state. Electron microscopic examination showed that as a result of annealing, crystallites are formed with a large projection onto the substrate plane, which grow due to the nearest neighbors. Moreover, these crystallites have not only a large area, but also a height. What is determined by atomic force microscopy. High crystallites are also faceted. This may indicate that the composition of these crystallites differs from the composition of the surrounding layer, which may be the reason for the increase in coercive force as a result of annealing.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Nanotechnology : the development , application - XXI Century
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
