Investigation of Steel and Polymer Fiber-Reinforced Self-Consolidating Concrete

Abstract

This paper will discuss how self-consolidating concrete (SCC) promises to shorten construction time while reducing the need for skilled labor. However, experience has shown that SCC may be prone to shrinkage cracking, which could compromise durability. In conventional concrete, fiber reinforcement has been used to control cracking and increase post-cracking tensile strength and flexural toughness. These benefits could be achieved in SCC without compromising the workability or stability, provided that the amount of fiber reinforcement is optimized. This project sought to evaluate the feasibility of fiber reinforced self-consolidating concrete (FR-SCC) for structural applications. Tests were conducted in the laboratory to assess the fresh and hardened properties of FR-SCC containing various types and concentrations of fiber. The results presented in this paper indicate that SCC with high flowability and some residual strength beneficial for crack control can be prepared for use in transportation facilities. The results of the experiments further show that, at optimal fiber additions, FR-SCC mixtures can have the same fresh concrete properties as traditional SCC mixtures. FR-SCC also demonstrates a considerable improvement in the residual strength and toughness of a cracked section. Though not specifically measured, increase in residual strength and toughness is expected to lead to the control of crack width and length. The increase in the FR-SCCs’ cracked section performance indicates that it can be expected to have better durability in service conditions than an identical SCC without fibers. In transportation structures FR-SCC can be used in link slabs, closure pours, formed concrete substructure repairs; or prestressed beams where end zone cracking has been an issue.