Abstract

Flow channel in bipolar plate for PEMFC has the function of transporting the fuel and oxygen and water. Stamping process for flow channel on metallic bipolar plates is an economic and convenient method for mass production. It is extremely important to predict and prevent the tearing, wrinkling, thinning, skid mark and spring back in stamping process. In this study, finite element method is used to predict the imperfection and analyze thickness variation during the stamping process. Dynaform software is employed to predict the performance of a stamping process. Forming Limit Diagrams are used to determine the safe limit of the metallic bipolar plates. In simulation, the dimension of flow channels, punch speed, radius of punch and die and draft angle were selected as variable process parameters. Experiments were conducted to compare with the simulation results. It is demonstrated that the simulation results are in good agreement with the experimental ones for ss304 metal sheets. So simulation model could be employed as a predictive tool to provide optimal parameters for better performance of the stamping process.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call