Investigation of rarefied flow over an open cavity using direct simulation Monte Carlo

Abstract

AbstractThe present study employs the direct simulation Monte Carlo (DSMC) technique to analyse the flow over a cavity, a commonly observed anomaly on a re-entry vehicle’s surface. The flow characteristics are examined for different Mach numbers ( ${\rm{Ma}}$ ) and Knudsen number ( ${\rm{Kn}}$ ). The Mach numbers varied from 5 to 25, while the Knudsen numbers varied from 0.05 to 21.10. The influence of the ${\rm{Ma}}$ and ${\rm{Kn}}$ on flow characteristics has been elucidated graphically in various sections. The flow properties showed significant variation with ${\rm{Ma}}$ and ${\rm{Kn}}$ and showed an increasing trend due to compressibility and viscous heating effects. The surface characteristics were observed to diminish as ${\rm{Ma}}$ increases, while they showed complex trends for various ${\rm{Kn}}$ . In all flow regimes, there was an appearance of flow recirculation. When chemical reactions were taken into consideration and compared with non-reacting flows, flow temperature was primarily influenced (which decreased due to energy absorption) compared to other properties. The results obtained are a complex interplay of the viscous heating, compression and rarefaction effects.