Abstract
The failure analysis of a heating device operated in a differential scanning calorimeter (DSC) is presented in this study. Preliminary visual examination, after instrument disassembly, revealed that device malfunction resulted from circuit interruption due to platinum (Pt) ribbon rupture, while a corroded copper (Cu) base connected to the Pt current leads was also identified. The tip of the ribbon has a twisted shape ending with a molten area, where a solidified grain structure was evident. A relatively coarse grain structure “pattern” has also been identified, beyond the melted fractured area, suggesting the occurrence of localized overheating. Transverse edge defects, located close to the fracture area are identified as stress raisers and constitute potential evidence of fatigue crack initiation sites. It can be postulated that the collected evidence support the hypothesis of thermo-mechanical fatigue as the plausible damage mechanism. Visual examination by means of optical stereo-microscopy together with Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectrometry for elemental microanalysis were used as the principal analytical techniques for the present investigation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.