Abstract

The asymmetric flow over a slender body was particularly sensitive to the nose at a high angle of attack (AoA). Two patterns of separation occurred on the noses of the pointed-nosed slender body and blunt-nosed slender body as open- and close-type separation, respectively. The effects of the bluntness were investigated at high AoA (α = 50°) to clarify the evolution of the separated pattern from open-to close-type separation by the nose and by the periodic characteristics of perturbed flow. Wind tunnel experimental tests were conducted to investigate the periodic characteristics of asymmetric flow at a Reynolds number ReD = 1.54 × 105, based on incoming free-stream velocity (U∞) and the diameter (D) of the model. A particle was attached to the tip of the nose to induce the perturbed flow and attain a definite and predictable asymmetric flow in experimental tests. The pressure scanning and surface oil-flow visualization techniques were used to capture the pressure distributions and flow separations. The major findings were that axial flow increases with the increase of bluntness, resulting in open-type separation turning into close-type separation, and the perturbation moved from downstream to upstream of starting points of the separation line. The critical bluntness of separation pattern switching from open-type to close-type located between 1.5 and 3. Thus, the management of perturbation on asymmetric flow pattern switched from directly participating in separation to influencing separation through micro-flow. Therefore, the locations of perturbation and starting points of the separation line were closely related to asymmetric flow management by perturbation, then affecting the periodic characteristics of perturbed flow.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.