Abstract
Esterification reaction of lactic acid with butanol to produce butyl lactate and its optimal conditions were investigated. Cyclohexane was used as entrainer to remove water to promote reaction yield. Catalyst of NaHSO4 was also used to increase reaction rate. Reaction parameters of butanol/lactic acid ratio, cyclohexane/lactic acid ratio, catalyst amount, and reaction time were optimized using Response Surface Methodology (RSM). Results showed that the butanol/lactic acid ratio was the most significant factor for esterification yield while interactions between butanol/lactic acid ratio and cyclohexane/lactic acid ratio, butanol/lactic acid ratio, and reaction time were less significant. The correlation coefficient between predicted values and experiment values was 0.985. The optimal conditions for the experiment are: ethanol/lactic acid ratio 5:1, cyclohexane/lactic acid ratio 1:1, catalyst loading 1.5%, and incubation period 3 hours. The esterification yield reaches 99.8% under these conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
