Abstract
Sources of transverse beam motion in the APS storage ring have been investigated for ground-motion- and water-system-induced vibrations of the magnet and vacuum systems, and for power supply ripple. The displacement of magnets in a bandwidth of 4-30 Hz have been reduced significantly by inserting viscoelastic damping pads between the girder supports and pedestals, and by welding the magnet cooling headers to the ceiling of the storage ring tunnel. Current ripple on magnet power supplies was identified as a source of horizontal beam motion. Beam motion was measured without the closed-orbit feedback system activated. At /spl beta//sub x/=15.4 m and /spl beta//sub y/=10.4 m the rms beam motion in the 0.02-30 Hz band was 22.7 /spl mu/m and 6.3 /spl mu/m in the horizontal and vertical planes, respectively. A few narrow-band structures of the horizontal beam motion spectrum in the 1-4 Hz band have to be investigated further to identify the sources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
