Investigation of Motorcycle Trajectories in 2-lane Horizontal Curves

Abstract

Most of the road design guidelines assume that the vehicles traverse a trajectory that coincides with the midline of the traffic lane. Based on this assumption the thresholds of various features are determined such as the maximum permissible side friction factor. It is therefore important to investigate the extent to which the trajectory of the vehicles is similar to the horizontal alignment of the road or substantial differences exist. To this end, a naturalistic riding study was designed and executed with the use of an instrumented motorcycle which measured the position of the motorcycle with great accuracy in a rural 2-lane road segment. The derived trajectories were then plotted against the horizontal alignment of the road and compared with the 3 consecutive elements which form a typical horizontal curve i.e., the entering spiral curve, the circular curve, and the exiting spiral curve. Linear equations were developed which correlate the traveled curvatures with the distance of each horizontal curve along the road segment under investigation. The process of the data revealed that the riders differ their trajectory compared to the alignment of the road. However, in small radius horizontal curves is more likely to observe curvatures that are similar to the geometric one. Moreover, the riders perform more abrupt maneuvres in the first part of the horizontal curves while they straighten the handlebars of the motorcycle before the end of the curve. The present paper aims to shed light on the behavior of motorcycle riders on horizontal curves and hence to contribute to the reduction of motorcycle accidents, particularly the single-vehicle ones.