Investigation of Microseismicity and Permeability Evolution in Shale Fractures during Stimulation

Abstract

SummaryShear slip of pre-existing fractures can play a crucial role in hydraulic stimulation to enable production from unconventional shale reservoirs. Evidence of the phenomenon is found in microseismic/seismic events induced during stimulation by hydraulic fracturing. However, induced seismicity and permeability evolution in response to fracture shear slip by injection have not been extensively studied in laboratory tests under relevant conditions. In this work, a cylindrical Eagle Ford Shale sample having a single fracture (tensile fracture) was used to perform a laboratory injection test with concurrent acoustic emission (AE) monitoring. In the test, shear slip was induced on the fracture at near critical stress state by injecting pressurized brine water [7% potassium chloride (KCl)]. Sample deformation (stress, displacement), fluid flow (injection pressure, flow rate), and AE signals (hits, events) were all recorded. The data were then used to characterize the fully coupled seismo-hydromechanical response of the shale fracture during shearing. Results show that the induced AE/microseismic events correlate well with the fracture slip and the permeability evolution. Most of the recorded AE hits and events were detected during the seismic-slip interval corresponding to a rapid fracture slip and a large stress drop. As a result of dilatant shear slip, a remarkable enhancement of fracture permeability was achieved. Before this seismic interval, an aseismic-slip interval was evident during the tests, where the fracture slip, associated stress relaxation, and permeability increase were limited. The test results and analyses demonstrate the role of shear slip in permeability enhancement and induced seismicity by hydraulic stimulation for unconventional shale reservoirs.