Investigation of microcracking behaviors in brittle rock using polygonal grain‐based distinct method

Abstract

AbstractThe failure process in brittle rocks is an important topic in rock mechanics, whose good understanding assists in predicting the strength and deformation characteristics of rocks. Because it is difficult to directly observe microcracks in laboratory tests, a numerical model is a useful tool for investigating microcracking behaviors. However, the mechanism of microcrack evolution is still unclear at the grain scale considering the microscopic heterogeneities. This paper proposes a polygonal universal distinct element code grain‐based model to solve this problem. Compared with other grain‐based models, this model is different in that mineral grains are subdivided into polygon blocks. The grain size, composition, and bond types of the contacts are incorporated, and both inter‐ and intra‐grain cracks are mimicked. Subsequently, micro‐parameters of the blocks and contacts are carefully calibrated according to the laboratory results. Following this, the calibrated model is employed to study the microcracking behaviors of granite in unconfined compression, confined compression, and Brazilian splitting tests. Both the cumulative numbers and locations of microcracks in different grains are recorded, and the types of macroscopic fractures are identified. The modeling results show that tensile cracks dominate the generated microcracks in the low confined compression tests, and the macroscopic fracture pattern is axial splitting. Shear cracks are dominant in the high confined compression tests, and the macroscopic failure pattern is X‐type shear failure. The simulated results are consistent with those observed in the laboratory tests, and thus, may assist in improving rock acoustic emission monitoring and understanding the damage process of rock.