Abstract
Abstract In this study, dual phase (DP 600) steel plates with a thickness of 1 mm were joined by copper-based (CuAl8) wire using gas metal arc brazing technique. Specimens were prepared in butt joint form. Brazing operations were done at four different working angles: 50°, 60°, 70°, 80° and 90°, respectively. CuAl8 wire consisted largely of copper served as the filler metal. After completing the brazing operations, the tensile properties as well as the micro- and macro-structures of the joints were analyzed in order to investigate the joinability of DP 600 steel using gas metal arc brazing technique.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.