Abstract
In this study, a bottom pouring-type stir casting machine was used to create AZ31 magnesium alloy hybrid nanocomposites with varying weight percentages (0, 3, 5, and 7) of silicon carbide (SiC) and graphite (Gr) particles. Investigations have been made into the mechanical characteristics and microstructural distribution of manufactured hybrid nanocomposites. The outcomes demonstrate that the mechanical characteristics and uniform distribution of SiC and Gr particles are enhanced compared to those of the base alloy. In comparison to monolithic AZ31 alloy, microhardness, ultimate tensile strength (UTS), yield strength (YS), and compressive strength (CS) were raised by about 54%, 68%, 82%, and 107%, respectively. The presence of reinforced particles, the uniform distribution of particles, and the strong interfacial connection between the matrix and reinforcement all contribute to the improvement of mechanical properties. However, the addition of 7 wt. % SiC/Gr showed good mechanical properties compared to the base alloy. The microstructure of nanocomposites was analyzed using a scanning electron microscope (SEM), and particles were described using energy-dispersive spectroscopy (EDS).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.