Investigation of Load Characteristics and Stress-Energy Evolution Laws of Gob-Side Roadways Under Thick and Hard Roofs

Abstract

The stress environments of gob-side roadways (GSRs) are becoming increasingly complex during deep coal mining under thick and hard roofs. This leads to strong strata behaviors, including roadway floor heave, roof subsidence, and even coal bursts. Among them, coal bursts pose the greatest threat to production safety in coal mines. Coal bursts in a GSR strongly correlate with the load characteristics and stress-energy evolution laws of the roadway. This study analyzes the roof structures of double working faces (DWFs) during the initial weighting stage (IWS) and full mining stage (FMS) of gob-side working faces (GSWFs). This study also explores how varying roof structures affect the stability of GSRs. Three-dimensional roof structure models of DWFs and mechanical models of dynamic and static loads superposition on a GSR throughout the IWS and FMS of a GSWF were developed. An analysis identified the primary stress sources affecting the GSR throughout various mining stages of the GSWF. Subsequently, the principle of “three-load” superposition was developed. A novel method was proposed to quantify the stress state in the GSR surrounding rock across different mining stages of the GSWF. The method quantitatively characterizes the load of the GSR surrounding rock. Based on this, the criterion for judging the burst failure of the roadway was established. Numerical simulations are used to analyze the stress-energy evolution laws of the working face, coal pillar, and GSR surrounding rock during the mining process of the GSWF. These findings offer valuable references for studying and preventing coal bursts in GSRs under equivalent geological situations.