Abstract
The impedance of an ion-selective electrode (ISE) to potassium with valinomycin as the ionophore and KBΦ 4 as the ionic sites was measured. The membrane was made of PVC with DNP as a plasticizer. The influence of the content of the plasticizer and the membrane thickness was investigated. The concentrations of the ionophore and the ionic sites were changed to modify the response on the ISE. Finally, the selectivity was tested in terms of impedance. All impedance experiments were correlated to the potentiometric curves plotted under the same experimental conditions. The measured impedances were compared to the model proposed in the previous paper (paper I). A good agreement was found.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.