Abstract
Purpose The purpose of this paper is to study the repeatability of path manufacturing in the drop on demand inkjet printing process and the influences of environmental and application factors on path resistance. Design/methodology/approach Paths were printed as multiline paths in packets one-, two- and three-layer paths on polyimide substrates using nanoparticle silver ink. The sintering conditions were determined experimentally. The paths were subjected to climatic and shock exposures and to bending processes. The resistance, profile and width of the paths were measured and analyzed. The temperature distribution for electrically heated paths was measured to identify the defects. Findings This research shows the repeatability of printing processes and identifies the sources that cause diversification in path parameters after the whole technological process. The influence of shock, climatic and mechanical exposures on path electrical properties is indicated. An effective method for identifying defects thermally is shown. Research limitations/implications The research could have limited universality by arbitrarily use of substrate material, ink, printhead, process parameters and kind of sample exposures. Practical implications The research includes practically useful information about the width, thickness, defects and resistances and their changes during a typical application for a path printed with different technological parameters. Originality/value This research presents the results of original empirical research on problems concerning the manufacture of paths with uniform parameters and shows how path parameters will change under exposures that may occur in a typical application. The research combines both production and application aspects.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
