Investigation of Fusion Weldments of Semi-Solid Aluminium A356 Alloy: Pool Geometry and Microstructure

Abstract

A fusion welding technique to join a semi-solid processed A356 cast plate is explored using Gas Tungsten Arc Welding (GTAW). Semi-solid metal (SSM) billets of non-dendritic microstructure produced by rheocasting in a mould placed inside a linear electromagnetic stirrer were used for this study. GTAW experiments were conducted to simulate different thermal gradients near the fusion zone. The geometries of the weld pool as well as the temperature gradient in the fusion boundary were measured to understand the microstructure evolution. Simulation of the welding process was performed to aid in the analysis. Quantitative metallography provided the shape factor as a measure of globularity of the primary a-Al phase. Based on the studies, a model has been proposed to explain the observation of globular microstructure in the fusion zone of the welds. Conclusions show a positive correlation of thermal gradient with globular microstructure formation in this class of alloys.