Abstract
Abstract Film cooling effectiveness downstream of one row of holes of 30 degree inclination angle was measured by using a steady-state thermochromic liquid crystal technique at blowing ratios of 0.5, 1.0, 1.5 and 2.0, respectively. Three kinds of dual-fanned holes which have the same expanded entrance width and the different expanded exit widths were tested. The configuration of only expanded entrance, but cylindrical exit hole, was tested to examine the effect of the expanded entrance on film cooling performance. The numerical simulation for the three expanded exit configurations was carried out explaining the mechanism of film cooling by the flow and thermal field. The only expanded entrance has a weak influence on film cooling effectiveness. The W o = 1.5 d ${W_o} = 1.5d$ configuration provides a lift of film cooling effectiveness compared to W o = 1.0 d ${W_o} = 1.0d$ configuration. Film cooling effectiveness is not sensitive to the change of configurations from W o = 1.5 d ${W_o} = 1.5d$ to W o = 2.0 d ${W_o} = 2.0d$ . Film cooling effectiveness for W o = 2.5 d ${W_o} = 2.5d$ performs significantly better than the other configurations due to the presence of the anti-vortex. The effect of dual-fanned exit width on film cooling effectiveness is strongly dependent on the blowing ratios.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.