Abstract

This article deals with the synthesis and the investigation of the structural features, magnetic and microwave properties of hard/soft (H/S) SrNi0.02Zr0.01Fe11.96O19 (SrNiZr)/CoFe2O4 (CFO)x (x = 1.0, 1.5, 2.0, 2.5, 3.0) nanocomposites (NCs). Products were manufactured via one-pot sol-gel auto-combustion approach. The formation of hard/soft phases was verified via X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high resolution transmission electron microscopy (HR-TEM) techniques. XRD analyses proved the presence of both hexagonal and cubic crystal structure in each H/S NCs. Vibrating sample magnetometer was employed to examine the magnetic features of the prepared NCs at room (RT; T = 300 K) and low temperatures (LT; T = 10 K). The magnetization (M) vs. applied field (H) curves displayed complete and good exchange coupling among the hard and soft phases for the different samples at 300 K. In contrast, an incomplete and weak exchange-coupled interaction was observed for all NCs at 10 K, excepting the SrNiZr/(CFO)1.0 NCs. The different magnetic parameters (Hc,Ms,Mr, and nB) were extracted for the H/S SrNiZr/(CFO)x (x = 1.0, 1.5, 2.0, 2.5, 3.0) NCs at both temperatures. All products exhibited a single magnetic domain since the value of squareness ratio is Mr/Ms> 0.5. The correlation of the electromagnetic properties (frequency dependences of the permittivity/permeability and reflection losses) as function of the magnetic phase ratio in H/S SrNiZr/(CFO)x (x = 1.0, 1.5, 2.0, 2.5, 3.0) functional NCs were analyzed from S11–S21 parameters (2–18 GHz). It was observed strong correlation between the CFO content (x) and electrodynamic parameters (permittivity, permeability, and reflection losses). It is established that these materials can be applied for electromagnetic compatibility and radar-technologies.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.