Abstract
This paper reports the results of a detailed study about specific properties of hybrid yarns and woven fabrics containing those yarns. For this aim, the fabrication procedures and physical properties of acrylic/stainless steel (SS) and cotton/acrylic/SS ply yarns were presented, and then, relations between those and electrical, electromagnetic shielding effectiveness (EMSE) and some usage properties of woven hybrid fabrics made from those with different constructions were investigated. EMSE of plain and twill fabrics were evaluated against radiating electromagnetic wave spectrum over a frequency 0–3000 MHz. A comparison of physical properties of yarns regarding wire diameter and the use properties of fabrics regarding weave type, wire diameter, and yarn type measured were presented. The functional textile products of complex applications can be achieved with low cost, easily since those yarns and fabrics were produced on conventional textile manufacturing machines with small modifications. The present study indicated that use of SS wire-based yarns in fabrics significantly increased the air permeability, pilling resistance, thermal resistance, and the flexural rigidity of hybrid fabrics. The plain weave fabrics exhibited higher EMSE values over 20 dB in higher frequencies and higher thermal absorbtivity values compared to twill fabrics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
