Investigation of drag and heat flux reduction induced by a novel combinational spike-aerodisk and channel concept for hypersonic blunt body

Abstract

For the drag and heat flux reduction of hypersonic blunt body, a novel combinational spike-aerodisk and channel concept has been proposed. The high pressure air behind the bow shock flows into the channel at the head of the aerodisk, and then sprays out through the lateral jet in the middle of the spike. The Reynolds-averaged Navier-Stokes (RANS) equations coupled with the shear stress transport (SST) k - ω turbulence model have been employed to simulate the flow field. The numerical results reveal that compared with the spike-aerodisk, with the application of the channel, the lateral jet pushes the separated shock wave away from the spike. The range of the recirculation zone between the shear layer and the spike is increased, and the intensity of the reattached shock wave is significantly weakened, so the drag and heat flux reduction properties of the combinational configuration are significantly improved. The influences of the channel convergent half angle and lateral jet location on the flow field, drag and heat flux reduction properties are investigated thoroughly. When the channel convergent half angle is appropriate and the location of the lateral jet is close to the middle of the spike, the drag and heat flux reduction effect becomes better. Besides, with the increase of the Mach number and the decrease of the flying height, the drag and heat flux reduction performance become more significant. In the research range, the combinational configuration in which the convergent half angle is 60° and the lateral jet is located in the middle of the spike has a better overall effect of drag and heat flux reduction, and the effect reaches the best when the Mach number is 6 and the flying height is 20 km. Compared with the spike-aerodisk, the total drag coefficient of the configuration is reduced by 12.95%, and the peak value of Stanton number along the blunt body surface is reduced by 35.19%.