Abstract
Thermal barrier coatings (TBCs) commonly expose to oxidation, hot corrosion, and CaO-MgO-Al2O3-SiO2 (CMAS) attacks during the service condition. All of these attacks cause the spallation or delamination of TBCs from the bond coat. In this study, the effect of these attacks on YSZ and La2Zr2O7/YSZ TBC systems was investigated. YSZ and double layer La2Zr2O7/YSZ topcoats were deposited using electron beam physical technique (EB-PVD) on CoNiCrAlY bond coat produced by cold gas dynamic spray (CGDS) technique. CMAS tests at 1225 °C for 4, 8, 12, 16, 20, 24, 28, and 32 h and 5 h cyclic hot corrosion tests at 1000 °C were carried out on TBCs. Before and after the tests, TBCs were characterized using scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), x-ray diffraction (XRD) and image analysis software program. At the end of the tests, the formed phases, microstructural changes, and general failure mechanisms were investigated in detail for each test. The general result shows that double-layered TBCs provide significant contributions and durability against high-temperature corrosive attacks of conventional YSZ TBC. In addition, in this study, hot corrosion damage mechanism and CMAS attack significantly damaged the column morphology of the EB-PVD method, reducing the thermal insulation properties and strain tolerance of TBCs. As a result of the tests, spallation and phase changes occurred in the damaged TBC systems.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
