Investigation of Automotive LiDAR Vision in Rain from Material and Optical Perspectives.

Abstract

With the emergence of autonomous functions in road vehicles, there has been increased use of Advanced Driver Assistance Systems comprising various sensors to perform automated tasks. Light Detection and Ranging (LiDAR) is one of the most important types of optical sensor, detecting the positions of obstacles by representing them as clusters of points in three-dimensional space. LiDAR performance degrades significantly when a vehicle is driving in the rain as raindrops adhere to the outer surface of the sensor assembly. Performance degradation behaviors include missing points and reduced reflectivity of the points. It was found that the extent of degradation is highly dependent on the interface material properties. This subsequently affects the shapes of the adherent droplets, causing different perturbations to the optical rays. A fundamental investigation is performed on the protective polycarbonate cover of a LiDAR assembly coated with four classes of material-hydrophilic, almost-hydrophobic, hydrophobic, and superhydrophobic. Water droplets are controllably dispensed onto the cover to quantify the signal alteration due to the different droplets of various sizes and shapes. To further understand the effects of droplet motion on LiDAR signals, sliding droplet conditions are simulated using numerical analysis. The results are validated with physical optical tests, using a 905 nm laser source and receiver to mimic the LiDAR detection mechanism. Comprehensive explanations of LiDAR performance degradation in rain are presented from both material and optical perspectives. These can aid component selection and the development of signal-enhancing strategies for the integration of LiDARs into vehicle designs to minimize the impact of rain.