Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation

Abstract

The isothermal austenite decomposition kinetics is studied in 0.004 wt pct C ultralow carbon (ULC) and 0.11 wt pct C low-carbon (LC) steel using high-speed quenching dilatometry. Standard samples of these steels are heated to austenitization temperatures of 1223 K and 1373 K (950 °C and 1100 °C) and then quenched to testing temperatures between 1163 K and 933 K (890 °C and 660 °C). The measured and calculated austenite-to-ferrite phase fractions are compared with dilatation values to analyze the ferrite nucleation and growth conditions during austenite decomposition. Ferrite evolution profiles are assessed to investigate the underlying growth kinetics. The analysis in ULC steel shows regimes of partitionless, partitioning, and two-stage transformation kinetics. In contrast, LC steel shows only diffusion-controlled transformation kinetics. The experimental results are well reproduced with thermokinetic calculations, thus supporting our interpretation of governing mechanisms during transformation.