Abstract
Indium tin oxide thin film (ITO film) has been deposited onto the quartz glass by a sol-gel process, followed by annealing in air. The temperature range from 200 to 800 °C and the annealing effect on the optical, electrical and structural properties of ITO films has been studied in detail. ITO Films with a thickness of 100nm had an optical transparency up to 90% in the wavelength range of visible spectrum. The ITO film showed minimum resistivity of 1.65×10-3Ω.cm-1 when annealing temperature was 600°C in air. the rapid annealing process may contribute to the electrical property of ITO film for the densification of the micro structure. but the process may lead to the decrease of transparency for the reflection caused by grain boundary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
