Investigation of acoustic and geometric effects on the sonoreactor performance.

Abstract

In this work, three design configurations of a sonoreactor are considered under various operating conditions, and the acoustic characteristics during water sonication are investigated while using an immersed-type ultrasonic flat transducer probe in a sonoreactor model. Numerical models are also developed to simulate the sonication process, and they are successfully validated and compared with available data in the literature. Several sets of numerical investigations are conducted using the finite-element method and solved by the computational acoustics module in the COMSOL Multiphysics. The effects of the acoustical and geometrical parameters are investigated, analyzed, and reported, including the ultrasonic frequency, acoustic intensity, and scaling-up the reactor. The present study includes a parametric investigation examining the change of the ultrasonic frequency, intensity, and probe immersion depth on the performance. The results of the parametric study show that the highest cavitation energy corresponds to the maximum magnitude of negative pressure that takes place in the range of 60-80kHz. The cavitation energy analyses are conducted under the conditions of 20kHz of frequency and at 36W input power. It is found that the cavitation energy of 15.87W could produce 2.98×10-10 mol/J of sonochemical efficiency. In addition, the effect of altering the transducer probe depth changes the acoustic pressure field insignificantly. Furthermore, a recommendation is made to improve the sonochemical efficiency by introducing more considerable ultrasound input power while operating the sonoreactor at an ultrasonic frequency lower than 60kHz. The results presented in this paper provide a comprehensive assessment of different sonoreactors and the feasibility of scaling-up their production rate.