Abstract
A low cost and easily fabricated plastic optical fiber (POF) displacement sensor is presented. The sensor is based on the macrobending POF with a V-groove structure fabricated by a simple die-press-print method, which is easy to implement and effectively reduces the complexity of the fabrication process. The intensity modulation method is adopted for displacement sensing, which lowers the sensor system’s cost and complexity. Experiments are carried out to investigate the influence of the structural parameters on the displacement sensing performance and the proposed POF probe is optimized by changing the structure parameters. Results showed that when the V-groove structure depth is 200 μm, the length is 22 mm, the angle is 60 deg, the pitch is 2 mm, and the macrobending radius of the POF probe is 15 mm, the highest sensitivity could reach to 3.19 × 10 − 2 / mm with the measurement range of 18 mm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.