Investigation of 3D printing of toddler foods with special shape and function based on fenugreek gum and flaxseed protein

Abstract

The practicability of using corn and flaxseed protein as printing inks for manufacture of printed products specifically designed for toddlers as a dysphagia diet with high precision and special shapes with addition of fenugreek gum (FGG) was investigated. 3D printing was used to process grains and dysphagia-compatible food (corn) into a dietary product with attractive appearance which was also easy to swallow. Rheological measurements shown that appropriate amount of flaxseed protein (FP, 0–10 %) can reduce the stickiness and yield strength of printing material. Based on FTIR measurements, FP weakened the hydrogen bond strength of inks, but it was still an important gradient for the formation of the ink suitable for precision 3D printing. The TPA results shown that the addition of FP (0–10 %) remarkably reduced both the stickiness and hardness of the ink. These results shown that compared with the control group, materials with FGG additions possessed higher printing accuracy and self-supporting ability. Ink with 5 % FP content exhibited the best printability and swallowability, while ink with 10 % FP content had the lowest viscosity and hardness, but it was not suitable for 3D printing. 3D printing of objects printed using Ink-C (5%FP and 0.8 %FGG) showed high support characteristic and attractive appearance. According to the international IDDSI testing standards, Ink-C (5%FP and 0.8 %FGG), Ink-E (15%FP and 0.8 %FGG), and Ink-F (20%FP and 0.8 %FGG) were defined as level 5-minced and moist foods.