Investigation into the heat transfer models for the hot crude oil transportation in a long‐buried pipeline

Abstract

AbstractBased on reasonable simplifications of a two‐dimensional (2D) energy equation, a basic heat transfer equation in 1D form is obtained for the hot crude oil transportation in a long‐buried pipeline. To enclose the heat transfer equation, the overall heat transfer coefficient and the numerical simulation of temperature fields of pipe wall and soil are introduced, and they together with the basic heat transfer equation constitute 1D and cross‐dimensional heat transfer models of crude oil transportation, respectively. Some numerical procedures, including grid generation, partial differential equation discretization, and algebraic equation solution, are combined to solve the two heat transfer models. Based on the designed cases with different pipeline parameters, the relative deviation between the numerical results from the two heat transfer models does not exceed 1%, and the two heat transfer models agree well. Furthermore, the nonuniform natural soil temperature field is designed, and its influence on the oil temperature and the deviation of the 1D heat transfer model is investigated. Under the condition of the nonuniform natural soil temperature field, the atmospheric temperature as the ambient temperature in the 1D heat transfer model causes an apparent deviation, whereas the soil temperature at the buried depth of the pipeline in the natural soil temperature field as the ambient temperature does not. This study can provide a reference for the reasonable selection and use of the heat transfer models of the buried hot oil pipeline.