Investigation into the anisotropic damage behavior of LA103Z Mg‐Li alloy rolling sheet using X‐ray computed tomography and numerical modeling

Abstract

AbstractThe anisotropic damage behavior has a great influence on the formability of rolling sheets. This work aimed to investigate the anisotropic damage mechanism of the LA103Z Mg‐Li alloy rolling sheet by combining mesoscale detection and modeling. The X‐ray computed tomography (XCT) and scanning electron microscope (SEM) were applied to characterize the evolution of damage morphology and volume fraction in RD, DD, and TD directions of the rolling sheet. The GTN damage model was calibrated by the experimental results with the representative volume element (RVE) method. The anisotropic damage mechanism was revealed via experimental and modeling results. The micro void nucleation strain εN was critical to determine the initiation moment of the anisotropic damage. The continuous nucleation in RD direction, the severe growth in DD direction, and the massive coalescence in TD direction were the micro void evolution competition results that caused the anisotropy for damage mechanism and fracture strain.