Abstract
In this work, we propose and demonstrate a micro-polishing-fiber (MPF)-based surface plasmon resonance (SPR) sensor. The structure of the sensor is simple and consists of three layers of regular air holes and two small air holes. The sensitivity seldom depends on the sizes of the air holes, which leads to a sensor with high structure tolerance. A tiny polishing depth ensures the mechanical strength of the polished fiber. There are three decisive factors for mass production and application of the sensor. A thin layer of indium tin oxide (ITO) film is applied to the polished surface to excite plasmonic interactions and facilitate refractive index (RI) detection. The SPR sensor is designed and analyzed by the finite element method (FEM), and optimized in terms of the air holes’ diameter, the ITO film thickness, and the core-to-surface interval. In the wide detection range between 1.32 and 1.39, the wavelength sensitivity can reach up to 11,600 nm/RIU. The MPF–SPR sensor exhibits great potential in the fields of optics, biomedicine, and chemistry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.