Investigation Into Hybridization of the Two-Fluid Model and Phase-Field Model for Multi-Scale Two-Phase Flow Simulations

Abstract

Abstract To simulate heterogeneous bubbly flows, a hybrid method has been developed in several studies by combining the two-fluid model and the interface tracking method. Since this original hybrid method is based on the one-pressure modeling, which is a common approach for the two-fluid model, unphysical flow would occur in the flow where the surface tension is dominant. To resolve this inherent weakness of one-pressure modeling, we proposed a new formulation of the hybrid method in this study. The proposed hybrid method includes no pressure term in the dispersed phase because we regarded the dispersed phase as a group of discrete particles. The phase-field method is employed as the interface-tracking method. The proposed hybrid method was validated in several numerical simulations. Using the static bubble problem, we confirmed that in the proposed hybrid method simulation, there is no unphysical flow that is observed in the original hybrid method. In the bubble plume problem, we compared the bubble plume behavior and the time-averaged void fraction of the simulation results with those of previously reported experiments and found good agreement between them. From these validations, we confirmed that the proposed hybrid method was applicable to heterogeneous bubbly flow simulation, and it avoided the weakness which the original hybrid method has.