Abstract

Recently, hydroforming has paid dividends in composite forming due to its uniform pressure distribution, which helps in reducing the delamination defects. Considering the need to develop an appropriate criterion for evaluating the formability of FMLs, inspired by sheet metal forming and testing, the uniform pressure loading test was adopted to characterize the formability of semi-cured FMLs by forming limit curve ( FLC). In this paper, both theoretical analysis models considering and ignoring the tangential cohesive effect were established, and the stress expression of the critical zone was given. The results show that the tangential cohesive stress demonstrates a non-negligible influence on the FLC. A new form of comprehensive FLC was given by defining global equivalent strain and global strain ratio and analyzed by the finite element method. In addition, the numerical simulation model and the experimental parameters were verified. A simplified Hashin criterion was proposed and developed into the numerical simulation as a subroutine based on theoretical analysis. Parameters such as blank holder pressure, pressure rate, and temperature were considered both in experiments and simulation. Only fiber stretching damage was distinguished in the cross, single, and arc crack but no wrinkling. As predicted theoretically, a lower forming limit is expected when FMLs are subjected to greater tangential cohesive stress. Finally, with the help of numerical simulation, the influence of different boundary conditions on the comprehensive FLC was studied. Instead of a simple evaluation of FMLs, this comprehensive FLC could be used directly to optimize hydroforming processes in the engineering field.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call