Abstract
Thousands of sprinkler heads, which have been sampled from in-service sprinkler systems, were tested by Fire Systems Group (FSG) of Industrial and Research Services (IRS) of CSIRO in accordance with the requirements of Australian Standard AS 1851: Part 3 (Maintenance of fire protection equipment - Automatic fire sprinkler systems) and SSL Test Specification FTS-123. During the course of this testing FSG investigated causes of test failures of the sprinkler head samples. The results of these investigations indicated that the main reasons for failure of used sprinkler heads were: adding sodium silicate (waterglass or egg preserver) to the system in order to overcome small leaks; intergranular corrosion of the lead-tinbismuth eutectic solder, which fastens together the two halves of the fusible link; extensive deposit of paint on the deflector and the glass bulb or fusible link; heavy build-up of dirt and debris on the frame, heat-sensitive element and deflector; adhesion of the orifice disc to its seat, due to glue-like deposits of corrosion product; and deep deposits of hardened sediment or heavy build-up of water hardness salts above the orifice disc. Language: en
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
