Investigating the Role of Mixed Oxides for Oxygen Evolution Reaction on Iridium Oxide Electrocatalysts

Abstract

Ongoing concerns over anthropogenic emissions, fossil fuel sustainability, and related geopolitical aspects point to an increasing need for cost-effective renewable fuel sources. A promising solution is the generation of hydrogen via the catalytic splitting of water, which can be achieved with the aid of proton exchange membrane (PEM) electrolyzers. Notably, the anode material in current commercially available PEM electrolyzers is typically iridium oxide. Despite its effectiveness in facilitating the oxygen evolution reaction (OER), the use of iridium oxide poses challenges due to the scarcity and high cost associated with this precious metal. As the quest for sustainable energy intensifies, ongoing research explores innovative approaches, such as the incorporation of alternative materials and catalysts, to enhance efficiency while addressing the economic and environmental concerns associated with iridium oxide. Studies have shown that incorporating mixed oxides and switching the supports for iridium oxide catalysts help lower the iridium loading while enhancing the OER performance.1,2 In this study, we investigate a series of different sputtered, mixed iridium oxides (Ta, Ti, Ir). We use a rotating disk electrode system to benchmark the catalytic activity of different loadings of mixed oxides. To measure the intrinsic activity of each catalytic active site, we use a home-built operando UV-Vis system to quantify the populations of surface species as well as track the kinetics of different redox transitions during OER. We incorporate nanoscale secondary ion mass spectrometry to probe the migration of different mixed oxide species before and after electrochemical cycling and use kelvin probe force microscopy to estimate the conductivity through the different films. In this study, we show the importance of cooperative effects between neighboring iridium oxide species and the coordination of iridium that are responsible for enhanced OER performance. These results indicate that doping modulates coverage dependent interactions at the surface, which affects both the binding energetics and populations of rate limiting intermediates. We believe this study will serve as a steppingstone for future designs of more cost-efficient PEM electrolyzers.(1) Oh, Hyung-Suk, et al. "Electrochemical catalyst–support effects and their stabilizing role for IrO x nanoparticle catalysts during the oxygen evolution reaction." Journal of the American Chemical Society 138.38 (2016): 12552-12563.(2) Zheng, Ya-Rong, et al. "Monitoring oxygen production on mass-selected iridium–tantalum oxide electrocatalysts." Nature Energy 7.1 (2022): 55-64.