Abstract
AbstractPredicting the fatigue life of wind turbine rotor blades is a challenging and crucial engineering task. This study investigates the correlation between modal parameters and the degradation of residual strength and tensile modulus in the cross‐ply glass epoxy laminate [0/90]7 used in wind turbine blades under fatigue loading. The tensile and vibration characteristics were assessed, followed by constant amplitude fatigue tests at 35%, 43% and 55% of the ultimate tensile strength, with R = 0.1 and a frequency of 8 Hz. The modal analysis was performed on the cycled specimens at life fractions from 0.05 to 0.70 and residual modulus and strength were obtained. The results establish a well‐defined correlation between these residual mechanical properties and the natural frequency. Normalized residual strength, tensile modulus and natural frequency demonstrated similar behaviors during the fatigue life. An initial rapid decrease in the first tenth of the life fraction was observed, followed by minimal changes up to a life fraction of 0.7. The strong correlation between the first mode natural frequency and both the residual strength and the tensile E‐modulus provides a promising basis for developing accurate fatigue life prediction models for fiber‐reinforced composite structures. © 2024 Society of Chemical Industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.