Investigating the possibility of using recycled magazine paper in the production of newsprint with the aim of proper management of paper waste

Abstract

In recent yr. due to reduced ligneous resources, increased demand for paper products, increased environmental concerns that are made from virgin papers production, and high volume of waste papers, the need for recycling of papers is felt more than ever. One of the important steps in the process of recycling paper is the deinking of waste papers. The purpose of this study is the deinking of the old magazine papers in order to produce newsprint. In the review, old magazine papers were deinked by Flotation method using: Sodium hydroxide (1%), Sodium silicate (2%), Hydrogen peroxide (1%), and DTPA (1%). Then they were bleached with an amount of Hydrogen peroxide (1/5%). 60 grams of paper was made under standard conditions for testing. Then the brightness of handmade papers was measured in three replicates. The result showed that the brightness of non-deinked papers was about 40%, after deinking, it was about 50%, and after bleaching, it was increased to about 60%. Results indicate that the use of Hydrogen peroxide and its derivatives in bleaching of waste papers are resulted in increasing brightness in several percent. By combining pulp prepared from recycled magazine paper with CMP pulp prepared from a broadleaf species, the results showed that the addition of deinked OMG significantly reduced the brightness of the control sample. Also, adding deinked magazine paper in any proportion to the mixture of imported CMP pulp and long fiber pulp (by increasing the opacity) improves the quality of the printed paper obtained. This recycled paper can be used in production papers that are used temporary and do not need high resistance (such as newsprints).