Investigating the performance of stone columns in an extremely soft clay—A case study

Abstract

SummaryStone columns are used to improve soft soils; however, they fail through bulging, punching, and lateral expansion when the soil is extremely soft. The present study investigated the performance of stone columns in an extremely soft clay (ESC) through the addition of the appropriate geosynthetic materials. Field test was conducted for the foremost purpose of obtaining the optimal spacing between the consecutive stone columns and therefore prevents the failures of stone columns in ESC soils. The study further examined the failure modes of stone columns for the case of ESC soils. The computer programming software FLAC 3D was used for modeling and simulation, while Auto CAD was used to draw needed geometries of the case study. The results revealed that the full encasement of the stone column with suitable geogrids, optimal spacing, and proper design of cushion will enable the efficient use of stone columns as a composite foundation in ESC. The considered appropriate thickness of the cushion was found to be 30 cm, and this cushion helps the embedded soft clay soils to work together with the installed encased stone columns in ESC soils. The center‐to‐center (optimal) spacing between two consecutive stone columns showed optimal performance at distance S ≤ 5d of the diameter of the stone column. These findings show that stone column encased with suitable geogrids and optimal spacing will improve the bearing capacity, reduce settlement, and decrease the lateral deflection as well as hoop strain of the foundation.