Investigating the impact of Cloisite® 15A nanoclays on the diffusivity of Irganox 1035 antioxidant in high‐density polyethylene nanocomposite

Abstract

AbstractKnowing the diffusion coefficients of antioxidants in packaging materials is essential to assess their effectiveness in protecting materials against oxidation, but also to prevent their eventual migration to food. In this work, the diffusion of a commercial phenolic antioxidant (Irganox 1035) was measured experimentally in pristine high‐density polyethylene (HDPE) and in HDPE nanocomposite filled with 3 wt% of nanoclays (Cloisite® 15A). Diffusion experiments were performed using the Roe's method between 60 and 100°C. The local concentration of Irganox1035 in each film was measured by UV–Vis spectroscopy from the UV absorbance at 282 nm. The adjustment of the experimental data by Fick's second law allowed us to deduce the values of the diffusion coefficient of Irganox1035 at each temperature and to show that the temperature dependence of this coefficient obeys an Arrhenius' law. It is shown that the incorporation of 3 wt% of Cloisite®15A into HDPE significantly hinders the diffusion of Irganox 1035 and increases its activation energy. Several mechanistic assumptions could explain this result, first the increase in the tortuosity of diffusion paths, but also the possible establishment of strong intermolecular interactions between the antioxidant and some chemical groups on the nanofiller surface, or even the formation of an interphase with reduced molecular mobility around the nanofillers.