Investigating the effects of precursor concentration and gelling parameters on droplet-based generation of Ca-Alginate microgels: identifying new stable modes of droplet formation

Abstract

Droplet-based microfluidics is an attractive approach for producing microgels due to its high potential to control the size and shape of the particles and precisely entrap the substances within the hydrogel matrix. However, the microfluidic generation of monodisperse microgels with desired structures is still challenging. Indeed, the rheological and interfacial properties of the immiscible fluids, as well as the adopted gelling strategy, play important roles in microfluidic methods. Herein, sodium alginate droplets with different concentrations are generated via a microfluidic device with a flow-focusing unit. Besides, a combined in situ and ex situ strategy is optimized to crosslink sodium alginate droplets in the presence of calcium ions. The effects of alginate concentration and junction width in the flow focusing unit are investigated on droplet size and droplet formation regimes. It is observed that by increasing the alginate concentration, the dripping regime of droplet formation may be transformed to one of the binary dripping or quasijetting regimes. In the binary dripping regime, two successive different-sized droplets are generated in each period of droplet formation, which leads to low monodispersity in the collected droplets. However, the droplets produced in the quasijetting regime are interestingly monodisperse and also smaller than those of the dripping and binary dripping regimes. The breakup dynamics of the alginate thread is also analyzed with a computational fluid dynamics (CFD) code. This analysis discloses that the viscous stresses, as well as the viscous dissipation, have important roles in controlling the stable modes of droplet formation.