Investigating the effect of material microstructure and irradiation temperature on the radiation tolerance of yttria stabilized zirconia against high energy heavy ions

Abstract

Yttria stabilized zirconia pellets with different crystallite sizes were irradiated with 80 MeV Ag6+ ions at room temperature and 1000 K to understand the effect of crystallite size/material microstructure and irradiation temperature on the radiation tolerance against high energy heavy ions [where electronic energy loss (Se) dominates]. XRD and Raman spectroscopy measurements reveal that, irrespective of the irradiation temperature, the nano-crystalline samples suffered more damage when compared with the bulk-like sample. A reduction in the irradiation damage, i.e., improvement in the radiation tolerance, was observed for all the samples irradiated at 1000 K. The reduction in the damage, however, was remarkably higher for the nano-crystalline samples compared with the bulk-like sample, and hence the difference in the damage between the bulk-like and nano-crystalline samples was also significantly lower at 1000 K than that at room temperature. The irradiation damage, against Se, was thus found to be critically dependent on the interplay between the irradiation temperature and the crystallite size. These results are explained on the basis of the “in-elastic thermal spike” model by taking into consideration the combined effects of crystallite size and environmental (irradiation) temperature on the electron-phonon coupling strength and the lattice thermal conductivity and hence on the resulting thermal spike. These results, besides being crucial from the fundamental prospect of comprehending the size and temperature dependent radiation damage against Se, may also be important from the perspective of designing highly nano-crystalline materials for applications in various radiation environments.