Abstract
The study reveals the effect of interstage pressure with the consideration of gas cooler outlet temperature on the cooling performance of an operating CO2 heat pump system currently in use at a dairy plant. Based on the numerical model and CO2 properties, it was found that the maximum mass fraction of liquid allocated for cooling can be achieved in the middle of the operating range of interstage pressure when the enthalpy at the location of the gas cooler outlet is between 341 kJ/kg. K and 399 kJ/kg. K (that is, the gas cooler outlet temperature is between 37.34 °C and 43.02 °C with a fixed discharge pressure of 85 bar), however, the maximum liquid fraction can be achieved at the upper limit of the pressure when the enthalpy is less than 341 kJ/kg. K and can be achieved at the lower limit of the pressure when the enthalpy is higher than 399 kJ/kg. K, respectively. In the comparative study on fixed and variable interstage pressure, it was found that there is small difference in cooling COP when the gas cooler outlet temperature is lower than 38.5 °C , while the COPs with variable interstage pressures surpass those with fixed pressures when the gas cooler outlet temperatures are even higher.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
